-- Robotic manipulation in unstructured, human-centric environments poses a dual challenge: achieving the precision need for delicate free-space operation while ensuring safety during unexpected contact events. Traditional wrists struggle to balance these demands, often relying on complex control schemes or complicated mechanical designs to mitigate potential damage from force overload. In response, we present BiFlex, a flexible robotic wrist that uses a soft buckling honeycomb structure to provides a natural bimodal stiffness response. The higher stiffness mode enables precise household object manipulation, while the lower stiffness mode provides the compliance needed to adapt to external forces. We design BiFlex to maintain a fingertip deflection of less than 1 cm while supporting loads up to 500g and create a BiFlex wrist for many grippers, including Panda, Robotiq, and BaRiFlex. We demonstrate that BiFlex simplifies control while maintaining precise object manipulation and enhanced safety in real-world applications. Designing robots capable of physical tasks in unstructured environments remains one of the core open problems of modern robotics. Unstructured settings are characterized by their inherent uncertainty that exposes robotic end-effectors to frequent and unpredictable forces. For example, when grasping a flat object or wiping a surface, inaccuracies in the perceived location could lead to the robot missing the target, or creating unexpected and dangerously high reactive forces that could damage the robot.

This paper presents a novel underactuated adaptive robotic hand, Hockens-A Hand, which integrates the Hoeckens mechanism, a double-parallelogram linkage, and a specialized four-bar linkage to achieve three adaptive grasping modes: parallel pinching, asymmetric scooping, and enveloping grasping. Hockens-A Hand requires only a single linear actuator, leveraging passive mechanical intelligence to ensure adaptability and compliance in unstructured environments. Specifically, the vertical motion of the Hoeckens mechanism introduces compliance, the double-parallelogram linkage ensures line contact at the fingertip, and the four-bar amplification system enables natural transitions between different grasping modes. Additionally, the inclusion of a mesh-textured silicone phalanx further enhances the ability to envelop objects of various shapes and sizes. This study employs detailed kinematic analysis to optimize the push angle and design the linkage lengths for optimal performance. Simulations validated the design by analyzing the fingertip motion and ensuring smooth transitions between grasping modes. Furthermore, the grasping force was analyzed using power equations to enhance the understanding of the system's performance.Experimental validation using a 3D-printed prototype demonstrates the three grasping modes of the hand in various scenarios under environmental constraints, verifying its grasping stability and broad applicability.

Abstract-- Recent advancements in large language models (LLMs) have shown significant promise in various domains, especially robotics. However, most prior LLM-based work in robotic applications either directly predicts waypoints or applies LLMs within fixed tool integration frameworks, offering limited flexibility in exploring and configuring solutions best suited to different tasks. In this work, we propose a framework that leverages LLMs to select appropriate planning and control strategies based on task descriptions, environmental constraints, and system dynamics. These strategies are then executed by calling the available comprehensive planning and control APIs. Our approach employs iterative LLM-based reasoning with performance feedback to refine the algorithm selection. The results demonstrate that using LLMs to determine planning and control strategies from natural language descriptions significantly enhances robotic autonomy while reducing the need for extensive manual tuning and expert knowledge. Furthermore, our framework maintains generalizability across different tasks and notably outperforms baseline methods that rely on LLMs for direct trajectory, control sequence, or code generation.

This paper presents the SPARK finger, an innovative passive adaptive robotic finger capable of executing both parallel pinching and scooping grasps. The SPARK finger incorporates a multi-link mechanism with Kempe linkages to achieve a vertical linear fingertip trajectory. Furthermore, a parallelogram linkage ensures the fingertip maintains a fixed orientation relative to the base, facilitating precise and stable manipulation. By integrating these mechanisms with elastic elements, the design enables effective interaction with surfaces, such as tabletops, to handle challenging objects. The finger employs a passive switching mechanism that facilitates seamless transitions between pinching and scooping modes, adapting automatically to various object shapes and environmental constraints without additional actuators. To demonstrate its versatility, the SPARK Hand, equipped with two SPARK fingers, has been developed. This system exhibits enhanced grasping performance and stability for objects of diverse sizes and shapes, particularly thin and flat objects that are traditionally challenging for conventional grippers. Experimental results validate the effectiveness of the SPARK design, highlighting its potential for robotic manipulation in constrained and dynamic environments.

Traditional robotic manipulation mostly focuses on collision-free tasks. In practice, however, many manipulation tasks (e.g., occluded object grasping) require the robot to intentionally collide with the environment to reach a desired task configuration. By enabling compliant robot motions, collisions between the robot and the environment are allowed and can thus be exploited, but more physical uncertainties are introduced. To address collision-rich problems such as occluded object grasping while handling the involved uncertainties, we propose a collision-inclusive planning framework that can transition the robot to a desired task configuration via roughly modeled collisions absorbed by Cartesian impedance control. By strategically exploiting the environmental constraints and exploring inside a manipulation funnel formed by task repetitions, our framework can effectively reduce physical and perception uncertainties. With real-world evaluations on both single-arm and dual-arm setups, we show that our framework is able to efficiently address various realistic occluded grasping problems where a feasible grasp does not initially exist.

Autonomous agents operating in adversarial scenarios face a fundamental challenge: while they may know their adversaries' high-level objectives, such as reaching specific destinations within time constraints, the exact policies these adversaries will employ remain unknown. Traditional approaches address this challenge by treating the adversary's state as a partially observable element, leading to a formulation as a Partially Observable Markov Decision Process (POMDP). However, the induced belief-space dynamics in a POMDP require knowledge of the system's transition dynamics, which, in this case, depend on the adversary's unknown policy. Our key observation is that while an adversary's exact policy is unknown, their behavior is necessarily constrained by their mission objectives and the physical environment, allowing us to characterize the space of possible behaviors without assuming specific policies. In this paper, we develop Task-Aware Behavior Fields (TAB-Fields), a representation that captures adversary state distributions over time by computing the most unbiased probability distribution consistent with known constraints. We construct TAB-Fields by solving a constrained optimization problem that minimizes additional assumptions about adversary behavior beyond mission and environmental requirements. We integrate TAB-Fields with standard planning algorithms by introducing TAB-conditioned POMCP, an adaptation of Partially Observable Monte Carlo Planning. Through experiments in simulation with underwater robots and hardware implementations with ground robots, we demonstrate that our approach achieves superior performance compared to baselines that either assume specific adversary policies or neglect mission constraints altogether. Evaluation videos and code are available at https://tab-fields.github.io.

Accurate prediction of human or vehicle trajectories with good diversity that captures their stochastic nature is an essential task for many applications. However, many trajectory prediction models produce unreasonable trajectory samples that focus on improving diversity or accuracy while neglecting other key requirements, such as collision avoidance with the surrounding environment. In this work, we propose TrajDiffuse, a planning-based trajectory prediction method using a novel guided conditional diffusion model. We form the trajectory prediction problem as a denoising impaint task and design a map-based guidance term for the diffusion process. TrajDiffuse is able to generate trajectory predictions that match or exceed the accuracy and diversity of the SOTA, while adhering almost perfectly to environmental constraints. We demonstrate the utility of our model through experiments on the nuScenes and PFSD datasets and provide an extensive benchmark analysis against the SOTA methods.

Sony Global Manufacturing & Operations Corporation, Minato-ku, Tokyo, Japan, 108-0075 Abstract: This paper presents a nonlinear model predictive control (NMPC) toward versatile motion generation for the telescopic-wheeled-legged robot Tachyon 3, the unique hardware structure of which poses challenges in control and motion planning. We apply the full-centroidal NMPC formulation with dedicated constraints that can capture the accurate kinematics and dynamics of Tachyon 3. We have developed a control pipeline that includes an internal state integrator to apply NMPC to Tachyon 3, the actuators of which employ high-gain positioncontrollers. We conducted simulation and hardware experiments on the perceptive locomotion of Tachyon 3 over structured terrains and demonstrated that the proposed method can achieve smooth and dynamic motion generation under harsh physical and environmental constraints. Keywords: Robotics, Real-Time Implementation of Model Predictive Control 1. INTRODUCTION Legged robots are promising robotic mobilities that can Moreover, they can lack safety, e.g., cause catastrophic damage to the robot itself and to the environment when Figure 1. Hardware structure of telescopic-wheeled-legged they fall.

There is significant evidence that real-world communication cannot be reduced to sending signals with context-independent meaning. In this work, based on a variant of the classical Lewis (1969) signaling model, we explore the conditions for the emergence of context-dependent communication in a situated scenario. In particular, we demonstrate that pressure to minimise the vocabulary size is sufficient for such emergence. At the same time, we study the environmental conditions and cognitive capabilities that enable contextual disambiguation of symbol meanings. We show that environmental constraints on the receiver's referent choice can be unilaterally exploited by the sender, without disambiguation capabilities on the receiver's end. Consistent with common assumptions, the sender's awareness of the context appears to be required for contextual communication. We suggest that context-dependent communication is a situated multilayered phenomenon, crucially influenced by environment properties such as distribution of contexts. The model developed in this work is a demonstration of how signals may be ambiguous out of context, but still allow for near-perfect communication accuracy.

This paper presents a novel interaction planning method that exploits impedance tuning techniques in response to environmental uncertainties and unpredictable conditions using haptic information only. The proposed algorithm plans the robot's trajectory based on the haptic interaction with the environment and adapts planning strategies as needed. Two approaches are considered: Exploration and Bouncing strategies. The Exploration strategy takes the actual motion of the robot into account in planning, while the Bouncing strategy exploits the forces and the motion vector of the robot. Moreover, self-tuning impedance is performed according to the planned trajectory to ensure compliant contact and low contact forces. In order to show the performance of the proposed methodology, two experiments with a torque-controller robotic arm are carried out. The first considers a maze exploration without obstacles, whereas the second includes obstacles. The proposed method performance is analyzed and compared against previously proposed solutions in both cases. Experimental results demonstrate that: i) the robot can successfully plan its trajectory autonomously in the most feasible direction according to the interaction with the environment, and ii) a compliant interaction with an unknown environment despite the uncertainties is achieved. Finally, a scalability demonstration is carried out to show the potential of the proposed method under multiple scenarios.